Jumper settings for MAKInterface Pro - PonyProg



   
24Cxx (I2C EEPROM)

Jumper-Setting +--------------------+
| 24680 :::::::::: + |
| 13579 IIIIIII:I: - |
+--------------------+

No power supply required

Verified with: 24C01, 24C02, 24C04, 24C16, 24C32, 24C256

Pin4=A0+A1+A2+VSS+WP
Pin6=SCL
Pin5+Pin7=SDA
Pin8=VCC

25xxx (SPI EEPROM)

Jumper-Setting +--------------------+
| 24680 :::::::::: + |
| 13579 IIIIIII:I: - |
+--------------------+

No power supply required

Verified with: 25020, 25040, 25320

Pin2=CS
Pin3=WP+HOLD
Pin4=GND
Pin5=SO
Pin6=SCK
Pin7=SI
Pin8=VCC

93Cxx (Microwire EEPROM)

Jumper-Setting +--------------------+
| 24680 :::::::::: + |
| 13579 IIIIIII:I: - |
+--------------------+

No power supply required

Verified with: 93C06, 93C46, 93C56, 93C66

Pin2=S
Pin4=VSS
Pin5=DO
Pin6=CLK
Pin7=DI
Pin8=VCC

AT89Sxx (Microcontroller)

Jumper-Setting +--------------------+
| 24680 :::::;:::: + |
| 13579 IIIIII::I: - |
+--------------------+

Power supply required

Verified with: 89S53, 89S8252

Verified with: 3.579MHz, 6MHz and 8MHz Crystal

Pin2=RST
Pin4=GND
Pin5=MISO
Pin6=SCK
Pin7=MOSI
Pin8=VCC
Pin,=XTAL1

AVRSxx (Microcontroller)

Jumper-Setting +--------------------+
| 24680 ::I::;:::: + |
| 13579 II:III::I: - |
+--------------------+

No power supply required

Verified with: 3.579MHz, 6MHz and 8MHz Crystal

Verified with: 90S1200, 2313, 2323, 2343, 2333, 4433, 4434, 8515, 8535, Tiny22

Pin2=RESET
Pin4=GND
Pin5=MISO
Pin6=SCK
Pin7=MOSI
Pin8=VCC
Pin,=XTAL1

PIC 16Fxx (Microcontroller)

Jumper-Setting +--------------------+
| 24680 :::::::::: + |
| 13579 IIIIIII:I: - |
+--------------------+

No power supply required

Verified with: 16F84

Pin4=VSS
Pin5+Pin7=RB7
Pin6=RB6
Pin8=VDD
Pin9=MCLR